Decode captured UART bytes and recognise voltage and baud-rate compatibility issues.
Guided setup
Load the UART preset.nDecode the hexadecimal byte sequence.nChange baud rate and estimate frame time.nValidate board logic voltage before connecting a USB-UART adapter.
Expected observations
Hex bytes decode to readable text when valid.nAt 115200 baud, a typical 8N1 byte uses ten bit periods.nCommon ground and safe logic levels remain mandatory.
Checkpoints
Check
Expected
Evidence
Payload
TCS LAB
Decoder outputnFraming
Fault injection
Fault
Symptom
Corrective action
Garbled text
Wrong baud or data format
Match transmitter settingsnNo data
Generate, measure, decode
Virtual Hardware Bench Pro
Use one reusable browser bench for signal generation, virtual measurement, protocol decoding and electrical board-to-module compatibility checks. All calculations run locally.
