Original BIOS dump
The first uploaded original is locked to this diagnostic session and cannot be overwritten by this workflow.
Diagnostic checklist for Dell Inspiron 15 3000 series laptops where the battery stops charging at 60% or refuses to charge at all.
Compatible models: Dell Inspiron 15 3567, 3576, 15 3000 series
This source did not expose enough power-sequence nets for a reliable automatic signal table. Use it only as a support/layout source and add verified board-specific measurements before marking the repair solved.
Record current draw in amperes at each observable stage. Historical comparison uses successful repairs of this exact board checklist. A different reading is a clue, not a component diagnosis.
Tip: enter only stages you actually observed. For boards that never reach a later stage, leave that stage blank rather than entering a guessed value.
Historical cases are diagnostic references only. Confirm readings on the board in front of you before replacing parts.
No structured solved-repair knowledge has been collected for this board yet. New V4.4 solved cases will build it automatically.
Reference only: The boards below share one or more stored platform attributes with this motherboard. Their voltages, component locations, designators, sequence details and repair findings are not automatically treated as facts for the current board. Verify against the current board schematic, boardview and measurements before use.
Matching becomes available when published board records contain exact charger IC, EC/SIO, CPU model, CPU VR controller or Platform/ODM metadata.
Bench actions are recorded in sequence for training, QC and future troubleshooting. Signal result changes remain in history even after a failed stage later passes.
The final solved forum case receives the complete timeline for this bench session. Manual actions should describe what was actually done, not a suspected cause.
Record only measurements observed on this board. The workflow does not assume a flash voltage, logic level or firmware fault from a single reading.
The first uploaded original is locked to this diagnostic session and cannot be overwritten by this workflow.
Stored as a separate attachment. Uploading it never modifies the original dump.
Select two or more solved cases from this board. Comparison is for diagnostic reference only; different revisions can behave differently.
Complete the applicable checklist and bench rows first. If solved, the completed diagnostic flow is converted into a resolved Repair Forum post automatically.
Every item must be PASS, or N/A with a reason. Any FAIL reopens the repair and blocks the solved forum post.
This report uses the QC selections currently on this page. It does not mark the repair solved or modify existing reports.
Aggregate repair patterns for LA-D703P, WDX0W, 0WDX0W. Historical patterns are references, not proof of the current fault.
No structured data yet.
No structured data yet.
No structured data yet.
No structured data yet.
Diagnosis time is calculated from V4.9 timeline evidence when available. Only server-recorded board-linked repair cases are counted; unsaved local bench sessions are excluded. Technician performance is never exposed on this board dashboard.
Record observed behavior on this board and adapter. Contract voltage and controller behavior vary by platform; this module does not assume that a higher-voltage PD contract must always be present.
Check only what was actually inspected. A failed item is a diagnostic clue, not an automatic component diagnosis.
Patterns are derived only from structured solved-case evidence for this board. Select a known failed signal below, or mark a bench row FAIL to open its matching history automatically.
Record board-specific observations. Missing display signals are clues only; expected voltage, polarity and timing must be verified from the schematic, panel specification or known-good board.
Complete the checks in order. The guidance below narrows the next area to inspect but does not declare a component faulty.
₹500 - ₹1,500
Final price confirmed after free device inspection. Includes 6-month warranty.
Enter the actual reading and select PASS or FAIL in the bench table. The assistant follows the LA-D703P, WDX0W, 0WDX0W power sequence and V6.9 solved-case patterns to suggest what to measure next.
As you record actual readings, the next recommended test will appear here.
Diagnostic aid: recommendations are based on checklist order and recorded repair history. Verify the exact board revision, measurement method and power state. A suggested test is not a declaration that a component is faulty.
Board-specific firmware reference for LA-D703P, WDX0W, 0WDX0W. Verify board revision, flash voltage/capacity, EC/ME requirements and checksum before programming.
No V7.3 known-good file is stored for this exact board/revision.
No V5.1 BIOS diagnostic dumps recorded for this board yet.
No BIOS/EC/ME solved-case reference has been identified for this exact board yet.
Safety: Compatibility is evidence, not permission to flash. Preserve the original dump and verify voltage, capacity, EC/ME region requirements, board revision and SHA-256.