Production Embedded Firmware Engineer
A structured Production learning path with prerequisites, ordered practical units and completion evidence.
0% complete0/9 required units
Learning outcomes
- Design deterministic non-blocking firmware.
- Use RTOS, watchdog, low-power and versioning correctly.
- Implement secure update, rollback and provisioning.
- Produce manufacturing self-test and release evidence.
Required tools
- ESP32-S3 or supported production target
- Debug probe and serial console
- Bench supply, DMM and oscilloscope
- Version control and reproducible toolchain
Prerequisites
Log in to enrol, unlock sequencing and save course progress.
Student loginOrdered course sequence
- 🔒Required · 2 hours
Non-Blocking Firmware Architecture
State-transition review
Complete the previous required unit to unlock. - 🔒Required · 8 hours
ESP32 FreeRTOS Multi-Task Controller
Submit task and watchdog evidence
Complete the previous required unit to unlock. - 🔒Required · 90 min
Semantic Firmware Versioning
Produce versioned release manifest
Complete the previous required unit to unlock. - 🔒Required · 10 hours
ESP32 Secure OTA with Rollback
Demonstrate failed-update rollback
Complete the previous required unit to unlock. - 🔒Required · 3 hours
Manufacturing Self-Test
Export test record with device identity
Complete the previous required unit to unlock. - 🔒Required · 60 min
Production Firmware Certification Examination
Pass certification assessment
Complete the previous required unit to unlock. - 🔒Required · 12 hours
ESP32 IoT Controller Production PCB
Complete PCB review and manufacturing package
Complete the previous required unit to unlock. - 🔒Required · 8 hours
ESP32 Vibration Anomaly Detector
Meet accuracy, flash, RAM and latency targets
Complete the previous required unit to unlock. - 🔒Required · 90 min
Embedded Systems Placement Practical
Pass instructor-reviewed placement practical
Complete the previous required unit to unlock.
Capstone and graduation
Produce a release candidate with signed/versioned firmware, safe rollback, provisioned device identity, calibration record, manufacturing self-test, redacted diagnostics and a production-readiness review.
Required course completion: 100%
Complete the remaining required units to graduate.